AI-Tek Resources
Not sure which speed sensor makes sense for your application? Use the AI-Tek Product Finder to find out.
Use the AI-Tek calculator to ensure that your sensor selection will produce enough output for your application.
Cross Reference P/Ns
Cross Reference P/Ns
NEW H TO RH SERIES
Increased Air Gap
More Precise Duty Cycle
Improved Fine Pitch Performance
No Rotational Alignment Required During Installation - Allows More Precise Control of Air Gap
ROTATIONAL HALL COMPARISON:
Supply Tracking: 50% ±15% was ± 30%
H1320 Series vs RH1320 Series Improved Specifications:
Target Air Gap: RH1320
.005" to .015" with a 24 Diametral Pitch Gear - New Fine Pitch Specification
.005" to .025" with a 20 Diametral Pitch Gear - was .000" to .015" with a 20 Diametral Pitch Gear
.005" to .050" with a 12 Diametral Pitch Gear - was .000" to .040" with a 12 Diametral Pitch Gear
.005" to .065" with a 8 Diametral Pitch Gear - was .000" to .055" with a 8 Diametral Pitch Gear
H1500/1600 Series vs RH1500/1600 Series Improved Specifications:
TTL Compatible: 50% ± 15% was ± 30%
Supply Tracking: 50% ± 15% was ± 30%
Target Air Gap: RH1500/1600
.005" to .020" with a 24 Diametral Pitch Gear - New Fine Pitch Specification
.005" to .030" with a 20 Diametral Pitch Gear - was .000" to .020" with a 20 Diametral Pitch Gear
.005" to .050" with a 12 Diametral Pitch Gear - was .000" to .045" with a 12 Diametral Pitch Gear
.005" to .075" with a 8 Diametral Pitch Gear - was .000" to .060" with a 8 Diametral Pitch Gear
Get In Touch
Are you ready to make a purchase or looking for more information on a specific product? Get in touch with someone from AI-Tek or find a distributor near you. If you have a unique, special requirement that cannot be met with any of the standard options, contact us to learn more about custom sensor options.
