• Passive (VR)

    Passive (VR)

  • RH Series

    RH Series

  • DH Series

    DH Series

  • BH Series

    BH Series

  • 70085 Series

    70085 Series

DH Series

AI-Tek has taken its years of experience of designing and manufacturing Hall Effect sensors for harsh applications and has developed a line of durable products for industrial, rail, military and automotive use.

The new AI-Tek DH series sensors are differential based, zero-speed, precision, single channel, speed sensors. At power-up, they calibrate themselves to the unique magnetic signature of their installed application and continue to update the calibration as the sensor is running. This unique combination of differential sensing technology and calibration make these sensors highly tolerant of installation misalignment, target geometry and composition, target run-out, vibration and air gap changes.

In comparison, the RH series are single-element based, zero speed, single channel speed sensors and are an excellent choice for general purpose speed sensing. Unlike the DH series that requires rotational alignment at installation, the RH requires no alignment. Air gap adjustment is precise and easy and similar to a VR type sensor.

The new DH sensor can sense each change in target movement, regardless of speed, from near zero to 15 kHz frequency range, generating a steady pulse train of frequency proportional to target speed. Typically, each time a gear tooth (or any ferrous discontinuity) passes in front of the sensor the output changes state. This type of sensor is known as a "P" type because it uses N-P-N transistor logic (as opposed to "N" type, which uses P-N-P transistor logic).

Key Features:

Reverse voltage protection, up to -30 Vdc, to prevent damage if miswired
High temperature range of -40°C to +125°C
Wide range of supply voltage in single design of 4.5 - 24 Vdc
Two output options of Supply Tracking or TTL Compatible
Rugged design meeting IEC 77 Standards (European Railroad Applications)
Require special alignment
Improved duty cycle
Improved fine pitch performance
Increased air gaps

Suitable for 32 diametral pitch or coarser gear (target), the standard catalog sensors are easily applied to your various sensing needs. If you have a unique, special requirement that cannot be met with any of the standard options, we will gladly review your specs and work with you on a special sensor design.

For more information download a PDF on the following:

DH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads
Download PDF

DH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads
Download PDF

DH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 Threads Hex Body with Cable
Download PDF

DH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 and 3/4 Threads Round Body with Connector
Download PDF

DH Series
Zero Velocity - Magnetic Hall Effect Sensors - 5/8 Threads Full Threaded with Cable and Temperature Output
Download PDF